PV Design Request Form - GeminiSolarDesign

What do you need help with?

Complete Solar Permit Design

PV + Battery / ESS Design

Commercial Solar Design

Off-Grid / Complex System Design

Electrical PE Stamp

Structural PE Stamp

Utility Interconnection Application / Documentation

AHJ or Utility Revision

Standalone Electrical Design / Calculations

Equipment or Plan Changes

Other Solar Design Support

Select all that apply.

Not sure? Select the closest option and provide the information you have.

Installer

Contractor

Homeowner

How did you hear about us? (Optional, but Preferred)

Name

Phone Number

Company (If Contractor)

License Number (If Contractor)

Property Owner Name

Property Address

Assessor Parcel Number (If Available)

Authority Having Jurisdiction (AHJ)

Zoning Type

Residential

Commercial

Agricultural

Other

System / Mounting Type

Roof Mount

Ground Mount

Carport / Canopy

Mixed / Multiple Mounting Types

Battery Only

Existing PV Modification / Addition

Other / Not Sure

Choose the configuration that best describes the project.

Existing Solar / Storage at the Property?

No Existing PV or Battery

Existing PV

Existing Battery / ESS

Existing PV + Battery / ESS

Not Sure

Existing System Details (If Applicable)

Approximate system size, equipment, age, or anything else known about the existing PV / storage system.

Electrical Service Voltage / Phase

Utility Company

(i.e. Pacific Power, Duke Energy)

Interconnection Work Needed

New Utility Application

Application Documents / Drawings Only

Existing Application Revision

Utility Correction / Resubmittal

Storage Addition

PV System Addition / Modification

Other

Select all that apply.

Utility Application Status

Utility Application / Project Number (If Available)

Meter Number (If Available)

Export Configuration

Standard Net Metering / Export

Zero Export

Limited Export

Non-Export / Self-Consumption

Not Sure

Existing Main Service Panel

(ex. 100A Panel w/ 100A Main Breaker, Bottom-Fed)

New Main Service Panel

(If upgrade of panel is required, i.e upsize to 400A Main from 200A)

Existing Subpanel(s)

(ex. 75A Sub w/ 75A Main Breaker)

Roofing Material

(Ex. Composite Shingle, Tile, Membrane)

Roofing Pitch

(Ex. 4:12 Pitch, 18.5°)

Rafter Spacing

(Ex. 16 inch O.C.)

Rafter Dimensions

(Ex. 2 x 6's)

Roof Framing Type

Trusses

Conventional Rafters

Engineered I-Joists

Other

Unknown

Approximate Rafter / Truss Span (If Known)

Approximate unsupported span, if available.

Structural / Framing Information

Drop files here or

Accepted file types: jpg, jpeg, png, pdf, dwg, dxf, Max. file size: 512 MB.

Upload attic photos, framing plans, structural drawings, truss sheets, roof details, foundation details, or other available structural information.

Seam Spacing (If Standing Seam Roof)

(Ex. 16 inch O.C.)

Number of Stories

(Ex. Three-Story Structure)

Slope of Ground (If Ground Mounted Array)

(Ex. Flat Grade, 20° Hill)

Solar Module Model

(Ex. Solar World SW280 Mono)

Number of Solar Modules (If Known)

Enter the proposed module quantity, if known.

Proposed PV System Size - kW DC (If Known)

Example: 12.4 kW DC

Battery Model

(Ex. Enphase Encharge 10T)

Backup Configuration

No Backup

Whole-Home Backup

Partial / Critical Loads Backup

Battery Without Backup

Not Sure

Battery Quantity / Total Capacity (If Known)

Example: 2 batteries / 27 kWh total

Generator Information (If Applicable)

Manufacturer, model, kW rating, and whether the generator is existing or proposed.

Inverter Model

(Ex. SolarEdge SE10000A-US)

Number of Inverters / Microinverters (If Known)

Enter the quantity, if known.

Power Optimizer (If being used)

(Ex. SolarEdge P300)

Stringing Configuration

(ex. 2 Strings of 10 Modules)

Grounding Method

Grounding Lugs

Grounding Mid Clamps

WEEB Clips

Other

Conduit Plan

Run Conduit Over Roof

Run Conduit Through Attic

Other

Conduit Type(s)

(ex. Run EMT through Attic, PVC Underground)

Racking System(s)

(ex. IronRidge Flush Roof Mount with 6" QuickMount Standoffs)

Tie-In Strategy

Tie-In Backfed Breaker (No Derating)

Tie-In Backfed Breaker (Derate Main Breaker)

Upsize Main Panel

Supply-Side Interconnection

Design Goal(s)

(ex. Optimize Roof Area for Maximum Harvest, Zero-out Utility, etc.)

System Layout Sketch

Drop files here or

Max. file size: 512 MB.

Equipment Location Notes

Parcel Map, AHJ / Utility Requirements or Corrections, Material List, Other Supplemental Information

Drop files here or

Max. file size: 512 MB.

AutoCAD Imagery (Roof Surface, Plot Plan, etc.) (If Available)

Drop files here or

Accepted file types: dst, dwf, dwfx, dwg, dws, dwt, dxb, dxf, Max. file size: 512 MB.

I agree to the Pricing Terms (See above for Pricing)

Solar Design Request Form

Tell Me About the Project